 | History for Infinity USB / Infinity USB Phoenix |  | | |
|
|
1.60 Build 1529 - Friday, September 14, 2007
[New features]
Support for Windows Vista 64 on Infinity USB Phoenix (drivers are now signed). |
|
| |
|
1.60 Build 1529 - Friday, March 2, 2007
[New features]
Support for Windows Vista on Infinity USB Phoenix. |
|
| |
|
1.52 Build 1504 - Friday, February 17, 2006
[Bugfixes]
Under very rare conditions, the software would terminate when loading a (hex) file to be programmed. The error only exists if Adobe Acrobat Reader 7.0 is installed on Windows XP SP2, and is caused by a component in Acrobat reader. |
|
| |
|
1.51 Build 1502 - Wednesday, November 9, 2005
[New features]
64bit driversupport for Windows XP64
Languages updated |
|
| |
|
1.50 Build 1472 - Tuesday, March 29, 2005
[New features]
Direct support for PICbased DragonLoaderCard
Built in loaders for PIC and Fun based DragonLoaderCard
Commandline parameters enhanced with -read and -restore command
Languages updated
Optimized automatic card selection based on detected CPU
[Bugfixes]
Fuses no longer resets when inserting a new card |
|
| |
|
1.48 Build 1443 - Wednesday, August 25, 2004
[New features]
Direct support for Funbased Dragonloader card (automatic spanning of .dra files). |
|
| |
|
1.47 Build 1413 - Tuesday, August 17, 2004
[New features]
Greek and Portuguese language added.
All languages fully translated.
Option added in installer to make it possible to install without the CPU-detect feature.
[Bugfix]
Fixed Avast antivirus crash on Windows 98.
Fixed minor bug when using custom card.
Fixed pressing cancel during verify didn't close window. |
|
| |
|
1.46 Build 1403 - Thursday, February 19, 2004
[Bugfix]
A bug making it impossible to write the external EEPROM on some Prussiancard3 / Funcard 5 was fixed. |
|
| |
|
1.45 Build 1401 - Monday, February 9, 2004
[New features]
Support for PrussianCard5/Funcard7 (AT90S8515 + 2*24C1024)
Support for FunCard Atmega8515/Funkey2 (Atmega 8515 + 24C256)
Card-aliases made more visible to eliminate card-naming confusion (for instance PrussianCard 5 and Funcard7 is the same card).
Commandline interface extended with commands for setting up the Phoenix interface on Infinity USB Phoenix
[Bugfixes]
A bug making it impossible to erase code-protected Silvercard, Greencard and Greencard2 was fixed. |
|
| |
|
1.40 Build 1383 - Thursday, December 18, 2003
[New features]
Option for auto erasing external eeprom before writing.
Autoprogram card on insert option.
Verify card against loaded files (normal programming verification is done during programming, so this option is only for comparing for instance 2 cards)
Searches the WB Electronics websites for updates on startup (can be disabled in the software).
Commandline-parameters for using the programmer in batch or scripting files (see cmdparam.bat in the diskimage for details).
[Bugfix]
CustomCard is now fully working with Atmega128 based cards without external Eeprom |
|
| |
|
1.35 Build 1313 - Thursday, August 14, 2003
[New features]
Clone card wizard, for very easy copying/cloning of all supported cards
Aliases for cards with more than one name (for instance Funcard3/PrussianCard) is added on the main window.
[Bugfixes]
Due to the new detection-algorithm of PIC16C84 and PIC16F84 CPUs in v1.30, programming of older GoldCards (PIC16F84/24C16 based) wasn't possible. PIC16F84/24C16 and PIC16C84/24C16 based goldcards are now supported. |
|
| |
|
1.30 Build 1281 - Thursday, June 26, 2003
[New features]
Norwegian language added
Major speed improvement on 'restore CPU-memory' feature
Blackcard (ATMega128 + 24C256) added
Better detection of PIC16C84 and PIC16F84 based cards
CustomCard added (use any combination of supported CPU/memory)
[Misc.]
Language layer updated |
|
| |
|
1.20 Build 1183 - Tuesday, March 18, 2003
[New features]
Restore flash/PIC memory after reading, writing or erasing external memory (optional in settings)
Full card-detection when card containing a CPU used on multiple different cards is inserted, for instance Funcard1-6 (optional in settings)
Support for HEX16 file format
Estonian and Icelandic language added |
|
| |
|
1.17 Build 1152 - Sunday, December 29, 2002
[Bugfixes]
Crashes when trying to erase external EEprom on GoldCard
Cardremoval not detected when removing card while reading external Eeprom |
|
| |
|
1.16 Build 1150 - Saturday, December 28, 2002
[New features]
PrussianCard4/FunCard6 (AT90S8515 + 24C1024) added |
|
| |
|
1.15 Build 1148 - Saturday, November 2, 2002
[New features]
PrussianCard3/FunCard5 (AT90S8515 + 24C512) added
Swedish, Finnish, Hungarian, Czechish and Polish language added
[Bugfixes]
Sporadic crashes under Windows XP when pressing "write" under specific circumstances |
|
| |
|
1.12 Build 1145 - Sunday, October 6, 2002
[New features]
EmeraldCard (16F628 + 24C64) added
[Bugfixes]
Driver now also works in Windows 98 v. 4.10.1998 |
|
| |
|
1.11 Build 1144 - Wednesday, September 25, 2002
[New features]
Different DPI settings supported in Windows (eliminates problem with missing buttons on non standard DPI settings) |
|
| |
|
1.10 Build 1143 - Thursday, September 19, 2002
[New features]
Support for JupiterCard2
Possible to disable verify for external EEprom (speeds up writing of external memory)
Tooltip on save, view and open icons
Support for embedded Int. EEprom in flash-file on AVR-based cards (funcard, ATMega etc.)
Support for CRD-files on internal and external EEprom
Turkish language added
Missing EOF marker in hex file gives a warning instead of an error
[Bugfixes]
Filecontents (small line under each loaded file) didn't display correct on all cards |
|
| |
|
1.07 Build 1137 - Friday, August 16, 2002
(First public release) |
|
| |
|
